How To Connect Network Printer Epson in DealPOS Apps

Customer Support DEALPOS
[Updated]

This article will explain how to configure your tablet with a network printer, and for another information, Here is a printer model that is compatible with our printer network

Model   Model  
TM-H6000V TM-U220
TM-T70 TM-m10
TM-T70II TM-m30
TM-T88IV TM-T20II-i
TM-T88V TM-T70-i
TM-T88VI TM-T82II-i
TM-T88VI-iHUB TM-T83II-i
TM-T90 TM-T88V-i
TM-L90 TM-U220-i
TM-P20 TM-T70II-DT
TM-P60II TM-T88V-DT
TM-P80 TM-H6000IV-DT

Or you can download .pdf in here : http://bit.ly/ListEpsonPrinter

 

1. Add New Printer Network

On Mobile Apps Go to Settings Menu and click "Add New Printer Button" and choose Epson network printer

2. Input Printer ID and IP Address

A. If you have a new printer and you don't know the IP Printer

When you first buy an Epson printer, it won't be able to connect to your network. To set it up first you'll need to change the network settings. IP Address needs to be set on a computer. You can't do this on your Tablet, as the printer needs to be plugged in to the computer to change Default IP Printer.  Follow this step for change your default IP Printer

- You must get the Default IP Address Printer

you should turn off your printer, and then push and hold the feed button and then turn on your printer, the printer will print a receipt that contain your printer IP Address

- First connect your printer to netbook / desktop pc to change the IP Printer to be the same with IP Router.  

Go to Control Panel -  Network and Internet - Network and Sharing Center - then go to Properties - click internet protocol version 4 TCP/IPv4 

EX: 

IP Default printer 

IP Address : 192.168.192.168

Subnet mask : 255.255.255.0

Default gateway : 192.168.192.1

You should insert IP Address in you desktop

IP Address : 192.168.192.xxx (xxx means free number)

Subnet mask : 255.255.255.0

Default gateway : 192.168.192.1


 - Go to the Printer Portal to change your IP Printer

Go to google chrome and type your Default IP Printer (192.168.192.168)

Insert the username and password (The default usually Username : epson and password : epson)

- Replace the IP Printer according to your IP router

- Change Epos-Print to Enable and then press the send button

- Insert the IP address that you set earlier to your mobile apps 

 

B. If your printer already has a networkIP from the router

- Turn off your printer, and then push and hold the feed button and then turn on your printer. (this will displaying print out with ip address)

- Make sure your ePOS-Print has been enabled, if it's not enabled you can follow this step

- If the IP address is same as the Router, Enter Printer IP into Mobile Apps

 

How to Enable Printing in Arabic, Chinese, etc.

Go to google chrome and type your Default IP Printer (192.168.192.168)

Insert the username and password (The default usually Username : epson and password : epson)

Change the Character Code Tables According to this image

d2c8ba97-dc37-41f3-9ed4-ae78a3f839d2.jpg

 

Disable Power Saving:

- Change energy efficient ethernet from enable to disable

- Change stand by mode from enable to disable

 

 

Watch this Tutorial as a Video

Was this article helpful?
2 out of 2 found this helpful

Articles in this Section

Comments

0 comments