Setup Network Printer on Your Mobile Apps

Customer Support DEALPOS
[Updated]

This article will explain how to connect your tablet with a network printer, Previously DealPOS only support for specific network printers, but now our system support connecting for all types of network printers.

Step 1. Add New Printer Network

On Mobile Apps Go to Settings Menu and click "Network"

On the type tab choose Network

Step 2. Input IP Address

I. If you have a new printer and you don't know the IP Printer

As an example of this process we use Epson printer

When you first buy an Ethernet printer, it won't be able to connect to your network. To set it up first you'll need to change the network settings. IP Address needs to be set on a computer. You can't do this on your Tablet, as the printer needs to be plugged in to the computer to change Default IP Printer.  Follow this step for change your default IP Printer

 

-You must get the Default IP Address Printer

You should turn off your printer, and then push and hold the feed button and then turn on your printer, the printer will print a receipt that contain your printer IP Address

 

- First connect your printer to netbook / desktop pc to change the IP Printer to be the same with IP Router.  

Go to Control Panel -  Network and Internet - Network and Sharing Center - then go to Properties - click internet protocol version 4 TCP/IPv4 

EX: 

IP Default printer 

IP Address : 192.168.192.168

Subnet mask : 255.255.255.0

Default gateway : 192.168.192.1

 

- You should insert IP Address in you desktop

IP Address : 192.168.192.xxx (xxx means free number)

Subnet mask : 255.255.255.0

Default gateway : 192.168.192.1

mceclip2.png

 

 - Go to the Printer Portal to change your IP Printer

Go to google chrome and type your Default IP Printer (192.168.192.168)

Insert the username and password (The default usually Username : epson and password : epson)

 mceclip3.png

 

- Replace the IP Printer according to your IP router

mceclip2.png

 

- Change Epos-Print to Enable and then press the send button

mceclip4.png

 

- Insert the IP address that you set earlier to your mobile apps, Save.

mceclip2.png

 

II. If your printer already has a network IP from the router

- Turn off your printer, and then push and hold the feed button and then turn on your printer. (this will displaying print out with ip address)

- Make sure your ePOS-Print has been enabled, if it's not enabled you can follow this step

- If the IP address is same as the Router, Enter Printer IP into Mobile Apps, Save

mceclip3.png

 

How to Enable Printing in Arabic, Chinese, etc.

- Go to google chrome and type your Default IP Printer (192.168.192.168)

- Insert the username and password (The default usually Username : epson and password : epson)

- Change the Character Code Tables According to this image

d2c8ba97-dc37-41f3-9ed4-ae78a3f839d2.jpg 

 

Disable Power Saving:

- Change energy efficient ethernet from enable to disable

- Change stand by mode from enable to disable

mceclip0.png

 

 

Watch this Tutorial as a Video

Was this article helpful?
3 out of 4 found this helpful

Articles in this Section

Comments

0 comments