Print Barcode Using Zebra GT820 (GT800 EPL)

Customer Support DEALPOS

Sometimes you want to use a unique marking system for your products with barcode to make the selling and transaction process easier and faster.
This article specifically explain the steps on installation and settings configuration of Barcode Printer Zebra GT820 (GT800EPL).

*Please using the Mozilla Firefox browser to print barcodes using Zebra GT820 Barcode Printer.

First thing you want to do is to connect your printer to your PC and install the driver. You can get the driver here click here

I. Install Printer Driver

Step 1. Open the downloaded driver, click next



Step 2. Tick accept the terms of the license agreement, Next



Step 3. Select the location of the driver installation folder, Next



Step 4. Select the user who wants to display the installation shortcut, Next



Step 5. After the installation process the program information will appear, Next



Step 6. Tick Run Zebra Setup, click Finish



Step 7.  The driver will preload the installation package to your system, Click Next



Wait for a moment



Step 8. Choose USB, Click next




Step 9. Connect the printer to the PC and turn off and turn on the printer again, Click Finish



Step 10. After the above steps are correct it will appear like this,



II. Setting Print Preview & Calibrate

Step 1. Double click on the barcode that has been installed ZDesigner GT800 (EPL)



Step 2. In the tab above select stocks click New



Step 3. You can adjust the size of your sticker label


* For maximum results please use a ruler to measure the width and height of your label paper,


Step 4. After setting the size of the label to display the print, you need to calibrate it so that the print results match

Go to Advance Setup, Media Settings - Thermal Transfer, Media Type - Label With Gaps, Calibrate, OK 



III. Browser Print Menu (Mozila Firefox)

After you set the print preview, you need to set the sticker size on each label

Step 1. Go to product and choose print barcode



Step 2. Click more menu to set your label



Step 3. On this page you can set the size of your barcode sticker label


*For maximum results, please use a ruler to measure the width and height of your label paper,

and each measurement result is please be converted to pixel to match, click here

Default Sticker Configuration Settings :


1 Column

(7.3cm x 5cm)

2 Column

(8.6cm x 2cm)

3 Column

(10.7cm x 2.5cm)

3 Coloumn

10.7cm x 1.5cm)

Width 290 350 420 420
Top 0 0 0 0
Left 0 5 5 5
Width 290 150 130 130
Height 185 81 93 56
Height 60 20 30 10
Column 5 20 13 10
Row 5 0 5 5
Product Name        
Font Size 20 10 12 8
Max Character 30 30 30 30
Note Margin none Margin none Margin none Margin none

* Note : For the default settings above, it still needs to be adjusted


Step 4.  After setting the sticker size, go to more - Print



Step 5. Make sure the Page setup for the header & footer page margins is blank



Step 6. On the print tab, you can choose the printer to use. If there are still adjustments, please choose preferences for the print appearance


*If there are adjustments to the print preview, you can follow the setup II above.




Was this article helpful?
1 out of 1 found this helpful

Articles in this Section