Sometimes you want to use a unique marking system for your products with barcode to make the selling and transaction process easier and faster.
This article specifically explain the steps on installation and settings configuration of Barcode Printer Zebra GT820 (GT800EPL).

*Please using the Mozilla Firefox browser to print barcodes using Zebra GT820 Barcode Printer.

First thing you want to do is to connect your printer to your PC and install the driver. You can get the driver here click here

I. Install Printer Driver

Step 1. Open the downloaded driver, click next

mceclip0.png

Step 2. Tick accept the terms of the license agreement, Next

mceclip1.png

Step 3. Select the location of the driver installation folder, Next

mceclip2.png

Step 4. Select the user who wants to display the installation shortcut, Next

mceclip3.png

Step 5. After the installation process the program information will appear, Next

mceclip4.png

Step 6. Tick Run Zebra Setup, click Finish

mceclip5.png

Step 7. The driver will preload the installation package to your system, Click Next

mceclip7.png

Wait for a moment

mceclip8.png

Step 8. Choose USB, Click next

mceclip14.png

Step 9. Connect the printer to the PC and turn off and turn on the printer again, Click Finish

mceclip15.png

Step 10. After the above steps are correct it will appear like this,

mceclip16.png

II. Setting Print Preview & Calibrate

Step 1. Double click on the barcode that has been installed ZDesigner GT800 (EPL)

mceclip16.png

Step 2. In the tab above select stocks click New

mceclip0.png

Step 3. You can adjust the size of your sticker label

mceclip1.png

* For maximum results please use a ruler to measure the width and height of your label paper,

Step 4. After setting the size of the label to display the print, you need to calibrate it so that the print results match

Go to Advance Setup, Media Settings - Thermal Transfer, Media Type - Label With Gaps, Calibrate, OK

mceclip2.png

You are all set!

Did this answer your question?