Skip to main content
Setup Zebra Barcode Printer

Setup and Using printer barcode Zebra

Christian Wijaya avatar
Written by Christian Wijaya
Updated over a week ago

Sometimes you want to use a unique marking system for your products with barcodes to make the selling and transaction process easier and faster.
This article specifically explains the steps for installation and settings configuration of Barcode Printer Zebra GT820 (GT800EPL).

The first thing you want to do is to connect your printer to your PC and install the driver. You can get the driver here : Click Here to Download Driver.

Table of Content :

I. Install Printer Driver

Step 1. Open Printer Driver to Install

Install Driver

Step 2. Accept Terms

Tick accept the terms of the license agreement, then click next.

Accept Terms

Step 3. Select Installation Folder, then Click Next

Choosethe location of the driver installation folder.

Select Installation Folder

Step 4. Choose Printer User, then Click Next

Select the user who wants to display the installation shortcut.

Choose Printer User

Step 5. Tick the Information Read, then Click Next

After installation process, the program information will appear.

Tick the Information Read

Step 6. Tick Run Zebra Setup, then Click Finish

Tick Run Zebra Setup

Step 7. Preloading Drivers

The driver will preload the installation package to your system, click next.

Preloading Drivers

Wait for a moment.

Wait for Preinstall Driver Package

Step 8. Choose USB, then Click Next

Choose USB

Step 9. Connect Printer to PC, then Click Finish

Connect the printer to the PC and turn off and turn on the printer again.

Connect Printer to PC

Step 10. Finish the Installation

After the above steps are correct it will appear like this :

Finish the Installation

II. Setting Print Preview & Calibrate

Step 1. View Printer Setiing

Double click on the barcode that has been installed ZDesigner GT800 (EPL).

View Printer Setiing

Step 2. Go to Stocks, then Add New Stock

In the tab above select stocks click new.

Add New Stock

Step 3. Adjust Sticker Size

You can adjust the size of your sticker label.

Adjust Sticker Size

Notes :

For maximum results please use a ruler to measure the width and height of your label paper.

Step 4. Calibrate Printer

After setting the size of the label to display the print, you need to calibrate it so that the print results match. Go to Advance Setup, Media Settings - Thermal Transfer, Media Type - Label With Gaps, Calibrate, Ok.

Calibrate Printer

You might also like to read these articles below :



Did this answer your question?